Apple superdrive firmware update 3.0 problem

#Apple superdrive firmware update 3.0 problem Patch
#Apple superdrive firmware update 3.0 problem plus

I put HDD back in lower bay and SSD in Optibay. Again, if I boot from external HDD, I got 3Gbit/s! At last, I swapped HDD and SSD. There was no success - each time after I reboot I accidentally got 3Gbit/s or 1,5Gbit/s, for no reason. I clone HDD to SSD and made SSD as boot disk. Then I installed SSD at lower bay and moved old HDD in Optibay. Because I do not need DVD, I removed DVD from top bay and put Optibay (cheap from China) at that place. If I boot from external (over USB) HDD, I got 3Gbit/s every time! At this time no solution for this Mac. I cannot understand what affect at behavior like that. In 'early 2009' SanDisk works sometimes 3Gbit, sometimes it goes to 1,5Gbit.

#Apple superdrive firmware update 3.0 problem plus

I have SanDisk Plus 120Gb in Mac Mini (early 2009) and SanDisk z400s 128Gb in Mac Mini (late 2009). I'd be curious to hear how other SSDs fare with this solution I'd also be interested in whether the CD solution works on an internal Superdrive. If you instead interfere with the startup, say by having a CD in the drive or by running Startup Manager, the link will negotiate to 3 Gbps. I can now repeatably and reliably get the link to run at 1.5 Gbps or 3 Gbps, depending on how I boot the Mini to the SSD.Д«ased on my observables, I would isolate the finickyness of the NVidia MCP79 chipset to a timing issue at boot-if you allow the startup to occur normally, the link negotiation will fall back to 1.5 Gbps. Then without the CD in the drive I tried running Startup Manager at boot (by holding down the Option key) and selecting the SSD, and the link was at 3 Gbps.

Even after several restarts it stayed at 3 Gbps, as long as the CD was in the drive. I put the CD back in and rebooted to the SSD, and the link was back at 3 Gbps. I ejected the CD and restarted the Mini, only to find it back at 1.5 Gbps.

I had no illusions that the failed firmware loader had miraculously updated the firmware, but I found it curious that the link would be at 3 Gbps after trying to boot from the CD. To my surprise, I found the link operating at 3 Gbps. Unfortunately, the Linux system failed during bootup, so I rebooted to the SSD.

#Apple superdrive firmware update 3.0 problem Patch

I figured I'd try the patch on the SSD Plus anyway (and return it to Amazon if it failed), so I burned the ISO to CD and tried to boot it off my external USB Panasonic DVD burner (the internal Superdrive has been dead for years). I found a discussion thread from 2012 on the Sandisk Forums isolating the issue to a finicky NVidia MCP79 SATA chipset on Macs of that era and suggesting going with other drive manufacturers I also found that Sandisk had acknowledged the problem and had released a firmware patch specifically for drives in Macs with the MCP79 chipset, albeit only for the Sandisk Extreme SSD. I just installed a 6 Gbps SATA III Sandisk SSD Plus in my late 2009 Mac Mini (running El Capitan) and was dismayed to find it operating at a negotiated link speed of 1.5 Gbps.